fbpx

*After 8 years of production, the GS-105 was replaced by it's successor, the GS-Cobra.

Specifications

Mechanical Performance

Degrees of freedom: 2(ability to simulate all forces in the horizontal plane) + vertical forces partially simulated through horizontal forces.

Actuators: 2 custom actuators built for this application.

Force resolution: 600 force levels possible on each degree of freedom. 250 forces updates per second.

Max force : 18Kg/40Lbs 

Max speed per actuator: 50cm/s 20"/s 

Bandwith: 50Hz

Mechanism: Full metal mechanism and gears, excepted two parts in acetal for noise reduction.

Frame: Wooden frame covered on all sides with PU foam and PU leather upholstery.

Harness: 4 points custom harness, removable.

Foot version only: Aluminium foot rotating with adjustable height  (gaz cylinder).

 

Electronics/Firmware:

Safety built in feature turns off the force reproduction whenever link with computer is lost.

USB driven.

Full galvanic insulation to protect the computer.

Upgradable firmware.

 

Software

Less than 1% CPU usage even on low end computers (AMD 64X2@2Ghz). 

Possibility to control how forces resulting from vehicle trajectory, handling and attitude are mixed.

High definition control using 7 bands equalizers.

 

System Requirements

Windows-based PC

Pentium® processor or compatible

Windows® 7 or Windows® 8.x or Windows 10

256 MB of RAM 

20MB of available hard disk space

USB 1.0 port

Requirements above only concern the GS-105.

Please refer to each specific game requirement.

 

Dimensions

 Version with foot:

Overall width: 55cms

Overall length: 75cms 

Overall height:

      • low position: 83cms
      • high position: 93cm

Sitting height:

      • Low position: 34cms
      • high position: 44cms

Weight: 31Kg 

 

Version without foot: 

Overall width: 55cms 

Overall length: 75cms (bottom board alone is 63cms long)

Overall height: 80cms

Sitting height: 30cms

 

Warranty information

1 year limited hardware warranty

 

Package contents

Geko Systems GS-105 motion simulator

Harness 

Power supply

USB cord

User documentation

Storage case (for Harness, supply, cord and docs)

Only for foot version: Foot, gaz cylinder